___________________________________________________________ << NX241 / NX242 LOADS - WARNING !! >> ___________________________________________________________ Do not upload the NX241 with a LOAD earlier than 2.20 when it is to be used together with the NX242. This is due to processing latency and phase compatibility. For more information see the NX242 manual or contact Fuzion Technical. Also IMPORTANT! Do not mix ANALOGUE AND DIGITAL TDCONTROLLERS in the same system. ___________________________________________________________ << NX241 FIRMWARE COMPATIBILITY WARNING >> ~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~~ In October 2009, Nexo withdrew support for the NX241. Loads for the NX241 ceased at this time and any loads greater than Version 2.48 are not compatible. Thus, the new PS-R2 series cabinets cannot be used with the NX241. If loads greater than V2.48 are uploaded to the device it may not function. Uploading to version 2.48 will restore normal operation of the unit. ___________________________________________________________ Note: Where a load has a "b" in the title this is a Beta version. Note that this MAY also be the latest load available at that time. A further load without the beta designation is usually available shortly. Contact Fuzion Technical for confirmation of the validity of these loads. ___________________________________________________________ When uploading firmware you must ALWAYS use the NXWINxx.exe loader that comes with that particular version load. If you use a loader that is currently installed on your machine the firmware may not be uploaded correctly. The loads available on our web server always include the correct loader. ___________________________________________________________ < Fuzion Technical 2009 >